Modeling of the thermal physical process and study on the reliability of linear energy density for selective laser melting

Modeling of the thermal physical process and study on the reliability of linear energy density for selective laser melting

Blog Article

A finite element model considering volume shrinkage with powder-to-dense process of powder layer in selective laser melting (SLM) is established.Comparison between models that consider and do not consider volume shrinkage or powder-to-dense process is carried out.Further, parametric analysis of laser power and scan speed is conducted VITAMIN K and the reliability of linear energy density as a design parameter is investigated.

The results show that the established model is an effective method and has better accuracy allowing for the temperature distribution, and the length and depth of molten pool.The maximum temperature is more sensitive to laser power than scan speed.The maximum heating rate and cooling rate increase with increasing scan speed at constant laser power and increase with increasing laser power at constant scan speed as well.

The simulation results and experimental result reveal that linear energy density is not always reliable using as a design parameter in the SLM.Keywords: Selective laser melting, Volume shrinkage, Powder-to-dense process, Numerical modeling, Thermal Mouthwash And Gargle analysis, Linear energy density.